TRUCK
ADS® Frames and SECUR-TABS® fasteners permanently
bond to most non-porous, flat, smooth surfaces.
To remove the frame and Secur-tabs® from a metal surface,
carefully peel back the frame from the metal
surface and slowly pull it
up. Start by using your fingers or a thin, flat,
metal, hand tool and pry up the frame.
|
Removing the
Adhesive Residue:
You can apply
lacquer thinner to assist in removing the adhesive residue.
Grimco Rapid Remover or other commercially available
adhesive removal products are effective. Apply
the liquid material to a cloth rag and wipe it onto
the surface where the residue is located to loosen
the bond, followed by a dry rag to force the residue
from the surface. Be careful. Do not use too much
liquid removal material or it might damage the paint
surface.
Use an Adhesive Eraser Wheel: Adhesive
eraser wheels (available at Walmart and auto
stores) are faster and easier than solvents or adhesive
cleaners. The wheel is also non-combustible. Resilient rounded edges follow contours
and irregular surfaces. Residue comes off without
scratches or damage to acrylic enamel or urethane
paint. |
Technical
Information and Data:
The information and
data, recommendations, and other statements
provided here are based on tests or experience,
which TRUCK ADS® believes to be reliable, but
the accuracy or completeness of such information
is not guaranteed.
Additional
Information:
Request additional information: Call 1 (800)
878-2523. |