Banner and Frame Kit Prices
DO IT YOURSELF (DIY) CHANGEABLE FRAME HARDWARE FOR VINYL BANNERS

Ordering Options

Order Any Size
Initially, you order a Starter Frame Kit (height and width in inches) that will  matches the size of your banner. Thereafter, when you replace a banner, order a Replacement Frame Kit of the same size.

We only accept online orders to insure accuracy and to save you money. Save up to 53%...

Mounting Requirements
TRUCK ADS Frame Kits™ securely adhere to raw metal, metal with baked on factory finish, fiberglass, glass and ceramic. Frames will remain in place until you decide to permanently remove them. Mounting surfaces MUST be non-porous, smooth and flat. Do not attach TRUCK ADSŪ Frames directly to corrugated metal, wood, brick, concrete or non-baked on painted surfaces. See installation instructions.

Not Included in Kits
You will need a rubber headed roller, scissors, denatured alcohol and a flex vinyl banner with scrim. (12 oz. minimum up to 23 oz. maximum). Available at the TRUCK ADS E-Store.

TRUCK ADSŪ patented frame is the only completely invisible, rivet-free, bolt free, screw free mobile billboard frame system. Frames are constructed from a hard durable polymer that affixes displays invisibly to trucks, vans, buses, walls and more. Incredible strength guarantees a secure bond in temperatures ranging from -40° to 200°F. Your vinyl banner can be reinstalled 100's of times. Attach the frame to metal and other non-porous flat smooth surfaces for long term reusability. Once it is installed, the frame and printed vinyl banner projects less than 1/4" from the surface.

TRUCK ADS Frame Kits™ come complete and ready to install on most flat, smooth, non-porous surfaces. Kits include the frame, TRUCK ADSŪ Activator™ and TRUCK ADSŪ Secur-TabsŪ. Secur-TabsŪ are the secondary fastener, required to prevent migration of the frame due to long and constant vibration. They are required for the overall integrity and safety performance of the TRUCK ADSŪ frame system. Properly installed, Secur-TabsŪ discourage tampering and theft.

Visit E-Store

The TRUCK ADSŪ Frame was put through rigorous tests by a leading independent vehicle engineering and testing firm. It passed without failure. The TRUCK ADSŪ Frame system has also been thru over 83 million miles of actual road use, with continuous speeds up to 75 mph for consistent periods, and 120 mph impact speed with 2 vehicles passing very close to each other. Our frame system has withstood all types of extreme weather conditions from freezing rains and temperatures (Canada) to high heat and winds (Mexico). TRUCK ADSŪ Banner Frames are stronger than metal frames.

Our banners and frames have been in continuous commercial use for over 5 years and over 83 million miles without failure.
 

SHOP ONLINE